MyBreathAway.com

VAPOR MITAGATION TECHNOLGY

As we breathe, we produce vapor and droplets

CAN A BREATH BE CAPTURED ??

MASKS DO NOT ASSIST IN THE GRAVITY DESCENT OF VAPOR AND DROPLETS

Surgical Masks

All masks do a great job of holding vapor and droplets near to a person's body and protecting others nearby.

N95 Respirator

N95 and KN95 Respirators conform to the face.  They capture and retard about 95% of vapor and droplets during breathing.

Elastometric Respirator

Anyone would look silly wearing this device in public.  Except we would all feel safer if everyone had one.  Unfortunately few people have them.  Most would never wear them in public.

MBA Personal 50mm or 80mm

Science Basis

A normal person takes 8 breathes per minute equivalent to about 4 liters per minute of air.  MyBreathAway is designed to move 226 / 566 liters per minute of air continuously. Vapor or droplets near MyBreathAway's entrance will be drawn into the vacuum created by a fan and expelled at ground level or can be captured as part of a larger mitigation system..  The volume of air emitted by MyBreathAway is insufficient to create turbulent flow at ground level.

The importance of safely conveying lung vapor to the ground is it permits us to work in closer proximity to one another reassured that the ground will likely absorb problematic heavy vapor, or if captured; can be plumbed to a recirculating sub-micron HEPA filter or out of the building all together.

Schedule 40 PVC Interconnect Modules . . . Control Enclosure Cooling

MBA-50 Wearable USB only or 24VDC

BASE UNIT SPECIFICATIONS

Dimensions:  3" x 3.5" x 2.375"

Connections:  2." ID - 2.375" OD 

Air Flow Rate:

226 Liters per Minute USB powered

320 Liters per Minute 24VDC powered

Power:  USB or 24VDC

MBA-50  USB/24VDC      $130

MBA-80 wearable USB only or 24VDC

BASE UNIT SPECIFICATIONS

Dimensions:  4.75" x 3.375" x 3.375"

Connections:  3" ID - 3.375" OD 

Air Flow Rate:

566 Liters per Minute USB powered

1246 Liters per Minute 24VDC powered

Power:  USB or 24VDC 

MBA-80  USB/24VDC      $200

MBA-92 choose USB or 24VDC

BASE UNIT SPECIFICATIONS

Dimensions:  5.5" x 3.75" x 4.375"

Connections:  4" ID - 4.375" OD 

Air Flow Rate:

860 Liters per Minute USB powered

1551 Liters per Minute 24VDC powered

Power:  USB or 24VDC 

MBA-92  USB/24VDC     $270

MBA-120 choose USB or 24VDC

BASE UNIT SPECIFICATIONS

Dimensions:  7.0" x 4.5" x 5.375"

Connections:  5" ID - 5.375" OD 

Air Flow Rate:

1302 Liters per Minute USB powered

2157 Liters per Minute 24VDC powered

Power:  USB or 24VDC 

MBA-120  USB/24VDC     $340

MY BREATH AWAY . WEARABLE

50mm WEARABLE TUBE SPECIFICATIONS

Hose is flexible, medium weight, 2.5" ID PVC hose.  Manufactured with FDA acceptable materials.    Cut To Length Service

   Specify input length (inches)

   Specify output length (inches)

BASE COST  $5 per foot

MY BREATH AWAY . WEARABLE

80mm WEARABLE TUBE SPECIFICATIONS

Hose is flexible, medium weight, 3.0" ID PVC hose.  Manufactured with FDA acceptable materials.    Cut To Length Service

   Specify input length (inches)

   Specify output length (inches)

BASE COST  $6 per foot

PREMIUM SOLUTIONS

Multi-Tube Capture and Expel.

We can provide Vacuum Pumps that can be used in your design to evacuate air from multiple collection tubes and plumb the exhaust outside of the building or exhaust inside through a 2 micron HEPA filter.

Industrial Automation & Motion

MyBreathAway products are exclusively sold in the US by:

IA Motion Products Inc.

4935 William Penn Hwy . Murrysville, PA 15668 . (412) 965-9956 . www.iamotion.net

Inquires to:   sales@mybreathaway.com

Workstation Installation

MyBreathAway is a solution to an HVAC problem that’s requires smaller parts and non-conventional thinking.  Standard HVAC heats and cools a room, nothing more.  MyBreathAway is designed to move air from each desk or workstation continuously and to convey captured air using PVC pipe (not included) to a safer location or a HEPA air purifier.  MyBreathAway is intended to help education, government and workplaces become safer by permitting the air we breathe to be captured and processed in any manner the designer chooses.

MyBreathAway is designed for use with standard inexpensive Schedule 40 PVC pipe and fittings that are readily available at any hardware store.  Anyone who has a saw, can cut the pipe to a desired length and install a system designed specifically for their workplace, school or office.  We do not recommend the use of glue anywhere in the system since all parts are designed to be reconfigured as classroom or office layout is changed.  Thus the system is NOT sealed.  This is inconsequential since it is a system in vacuum.  We suggest simple tape be used to retain parts together.  Tape is CHEAP and makes disassembly very easy.

SYSTEM DESCRIPTION